Jump to: Environment Shortcuts, Project Shortcuts, Project Panel Shortcuts, CAM Panel Shortcuts, List Panel Shortcuts, Common Schematic and PCB Editor Shortcuts, Schematic Editor Only Shortcuts, PCB Editor Only Shortcuts, 3D Body Placement Shortcuts, PCB3D (Legacy 3D) Editor Shortcuts, PCB3D Library Editor Shortcuts, Output Job Editor Shortcuts, …
F1 | Access Documentation Library (In Context with Object Under Cursor) |
Ctrl+O | Access Choose Document to Open Dialog |
Ctrl+F4 | Close Active Document |
Ctrl+S | Save Current Document |
Ctrl+P | Print Current Document |
Alt+F4 | Close Altium Designer |
Ctrl+Tab | Cycle Through Open Documents(to the Right) |
Shift+Ctrl+Tab | Cycle Through Open Document(to the Left) |
Drag &Drop from Windows Explorer into Altium Designer | Open Document as a Free Document |
F4 | Hide/Display all Floating Panels |
Shift+F4 | Tile Open Document |
Shift+F5 | Toggle between Active Panel and Workspace |
Shift+F1 | Access Natural Language Search Facility (Smart Search) |
Hold Ctrl While Moving a Panel | Prevent Automatic Docking |
C, then C | Compile the current Design Project |
C, then R | Recompile the current Design Project |
C, then D | Compile Document |
C, then O | Open Options for Project Dialog for current project |
Ctrl+Alt+O | Access Open Project Document Dialog for current Project |
C, then L | Close all Document belonging To Active Project |
C, then T, then M | Access Storage Manager Panel |
C, then T, then L | Access Local History for the current Project |
C, then P | Access Project Packager Wizard |
Double Left-click | Edit Document Under Cursor |
Drag & Drop from one Project to another | Move Selected Document |
Ctrl+Drag & drop from one project to another | Link Selected Document Into Second Project |
Select Layer | Turn All Layers Off Except Selected One |
Select Layer | Turn All Layer On |
Double Left-click On a Layer | Make That Layer the Current Layer |
Select two Layers, then C | Access Compare Layer Dialog |
Select Layer, then Delete | Delete Layer |
Left-click & Drag | Multi-select in direction of mouse movement |
Ctrl+Click | Multi-select (non-sequential) |
Shift+Click | Multi-select (sequential) |
Spacebar (Schematic) | Edit Selected Cell |
Spacebar (PCB) | Flush Current Entry for Cell Currently Being Edited |
F2 | Edit Selected Cell |
Enter (schematic) | Finish Editing Current Cell |
Enter (PCB) | Finish Editing Current Cell and Enter Edit Mode for Cell Beneath |
Ctrl+C (or Ctrl+Insert | Copy |
Ctrl+V (or Shift+Insert | Paste |
Page Up | Jump Selection to Top of Visible List Area |
Page Down | Jump Selection to Bottom of Visible List Area |
Mouse-Wheel | Pan UP or Down |
Shift | While auto-panning to pan at higher speed |
Y | While placing an object to flip it along the Y-axis |
X | While placing an object to flip it along the X-axis |
Ctrl+Shift+Arrow Keys | Move selection ten grid increments in direction of arrow key |
Shift+Arrow Keys | Move cursor ten grid increments in direction of arrow key |
Ctrl+Arrow Keys | Move selection one grid increment in direction of arrow key |
Arrow Keys | Move cursor one grid increment in direction of arrow key |
Esc | Escape from current process |
End | Redraw the screen |
Home | Redraw screen with center at the cursor point |
Ctrl+Home | Jump to absolute origin (lower left corner of workspace) |
Ctrl+Page Down or Mouse-wheel down | Zoom out |
Ctrl+Page Up or Mouse-wheel up | Zoom in around cursor (zooms around cursor, then position the cursor first |
Mouse-wheel | Pan up/down |
Shift+Mouse-wheel | Pan left/right |
A | Display Align sub-menu |
B | Display Toolbars sub-menu |
J | Display Jump sub-menu |
K | Display Workspace Panels sub-menu |
M | Display Move sub-menu |
O | Pop-up Right-click Options menu |
S | Display Select sub-menu |
X | Display Deselect sub-menu |
Z | Pop-up menu with zoom commands |
Ctrl+Z | Undo |
Ctrl+Y | Redo |
Ctrl+A | Select all |
Ctrl+C/Ctrl+Insert | Copy |
Ctrl+X/Shift+Delete | Cut |
Ctrl+V/Shift+Insert | Paste |
Ctrl+R | Copy to clipboard and repeat paste selected objects (Rubber Stamp) |
Ctrl+R, then Esc | Re-enters Rubber Stamp mode using the current clipboard content |
Ctrl+Q | Access the Selection Memory dialog |
Alt | Constrain object movement horizontally or vertically |
Delete | Delete selection |
V then D | View document |
V then F | View fit placed objects |
X then A | De-select all |
Right-click & hold | Display slider hand & slide view |
Left-click | Select/deselect object under cursor |
Right-click | Pop-up floating menu, then Escape from current operation |
Right-click on object, then select Find Similar | Load object under cursor into Find Similar Objects dialog |
Left-click, then hold & drag | Select inside area |
Left-click & hold | Move object/selection under cursor |
Left Double Click | Edit object |
Shift+Left-click | Add/remove object from selection set |
TAB | Edit attributes while placing |
Shift+C | Clear current Filter |
Shift+F | Click on object to display Find Similar Objects dialog |
Y | Pop-up Quick Queries menu |
F11 | Toggle Inspector panel on/off |
F12 | Toggle Filter panel on/off |
Shift+F12 | Toggle List panel on/off |
Alt+F5 | Toggle full screen mode |
Shift+Ctrl+T | Align selected objects by top edges |
Shift+Ctrl+L | Align selected objects by left edges |
Shift+Ctrl+R | Align selected objects by right edges |
Shift+Ctrl+B | Align selected objects by bottom edges |
Shift+Ctrl+H | Distribute selected objects equally in horizontal plane |
Shift+Ctrl+V | Distribute selected objects equally in vertical plane |
Shift+Ctrl+D | Align selected objects to grid |
Ctrl+1...8 | Store current selection in memory location n |
Alt+1...8 | Recall selection from memory location n |
Shift+1...8 | Add current selection to selection already stored in memory location n |
Shift+Alt+1...8 | Recall selection from memory location 1...8 and add it to current selection in workspace |
Shift+Ctrl+1...8 | Apply filtering based on selection set in memory location 1...8 |
G | Cycle through snap grid settings |
F2 | Edit in-place |
Ctrl+Page Down | Fit all objects into view |
Spacebar | Rotate counterclockwise by 90 degrees while moving an object |
Spacebar | Toggle start/End mode while placing a wire/bus/line |
Shift+Spacebar | Rotate clockwise by 90 degrees while moving an object |
Shift+Spacebar | Cycle Step through placement modes while placing a wire/bus/line |
Ctrl+Spacebar | Rotate counterclockwise by 90 degrees while dragging an object |
Shift+Ctrl+Spacebar | Rotate clockwise by 90 degrees while dragging an object |
Shift+Ctrl+C | Clear all highlighting applied by highlighting pens |
Backspace | Remove the last vertex when placing a wire/bus/line/polygon |
Left-click, then hold +Delete | When a wire is selected to Delete a vertex |
Left-click, then hold+Insert | When a wire is selected to add a vertex |
Ctrl+Left-click & drag | Drag object |
Left-click in Navigator panel | Cross probe to object on schematic document |
Alt+Left-click in Navigator panel | Cross probe to object on both schematic document and PCB |
Alt+Left-click on net object | Highlight all elements in net on sheet |
Ctrl+Double Left-click | On sheet symbol to descend hierarchy |
Ctrl+Double Left-click | On port to ascend hierarchy |
+/- on Numeric keypad | Enlarge/ reduce IEEE symbol size during placement or movement |
Ctrl+F | Find text |
Ctrl+H | Find and replace text |
F3 | Find next occurrence of searched text |
Insert | Copy attributes of object under the cursor while placing an object of the same type |
S | Swap sheet entry side while moving one or more selected sheet entries |
V | Reverse sheet entry order while moving two or more selected sheet entries |
T | Toggle sheet entry IO type while moving one or more selected sheet entries |
T | Toggle all sheet entry IO types while resizing selected sheet symbol |
T, then P | Access Schematic – General page of Preferences dialog |
Shift+R | Cycle through three routing modes |
Shift+E | Toggle electrical grid on/off |
Shift+B | Build Query |
Shift+Page Up/ Page Down | Zoom-in/ zoom-out in small increments |
Ctrl+Page Up | Zoom-in to 400% |
Ctrl+Page Down | Fit document into view |
Ctrl+End | Jump to defined relative origin for the workspace |
Alt+End | Redraw current layer only |
Alt+Insert | Paste on current layer |
Ctrl+G | Pop up Snap Grid dialog |
G | Pop up Snap Grid menu |
N | Hide the ratsnest while moving a component |
L | Flip component being moved to other side of board |
Shift+F1 | Pressed while routing, then displays the appropriate interactive routing shortcut keys |
F2 | Display Board Insight and Heads Up display options |
Ctrl+Left-click | Highlight routed net under cursor (repeat in free space to clear) |
Ctrl+Spacebar | Cycle through connection lines modes during interactive routing |
Backspace | Remove last track corner during interactive routing |
Shift+S | Toggle single layer mode on/off |
O, then D, then D, then Enter | Set all primitives to display in draft mode |
O, then D, then F, then Enter | Set all primitives to display in final mode |
O, then D/Ctrl+D | Access Show/Hide page of View Configurations dialog |
L | Access Board Layers and Colors page of View Configurations dialog |
Ctrl+H | Select connected copper |
Ctrl+Shift+Left-click & hold | Break track |
Shift+Ctrl+Left-click | Highlight additional routed net under cursor |
+/- on numeric keypad | Next/ previous layer |
Ctrl+Click | Highlights layer content on layer tabs |
Ctrl+Shift+Click | Increments highlighting on layer tabs |
Ctrl+Alt+Mouse | Hovers highlight layer on layer tabs |
* on Numeric keypad | Next routing layer |
M | Display Move sub-menu |
Alt | Hold to temporarily switch from avoid-obstacle to ignore-obstacle mode |
Ctrl | Hold to temporarily disable electrical grid while routing |
Ctrl+M | Measure distance |
Spacebar (in interactive process) | Rotate object anti-clockwise (define rotation step on PCB Editor – General page of Preferences dialog) |
Spacebar (during interactive routing) | Toggle start/End mode |
Shift+Spacebar (in interactive process) | Rotate object being moved clockwise |
Shift+Spacebar (during interactive routing) | Step through corner modes during interactive routing |
[/ ] | Decrease/ Increase mask level for permanent filter |
Alt+Left Arrow/ Right Arrow | View previous/ next component for active library document |
Q | Toggle units (metric/imperial) |
T, then B | Access 3D Body Manager dialog |
T, then P | Access Preferences dialog |
Shift+Mouse-wheel | Pan left/right |
Ctrl+Mouse-wheel | Zoom in/ out incrementally |
Ctrl+Right drag | Zoom in/ out smoothly |
Ctrl+C | Create clipboard bitmap (.bmp) image of current 3D view |
Page Up/ Page Down | Zoom in/out incrementally |
T, then P | Access PCB Editor – Display page of Preferences dialog |
L | Access Physical Materials (3D) page of View Configurations dialog |
+/- | Next/ previous layer |
L | Flip 3D body to paired mechanical Layer |
X | Flip 3D body around X-axis |
Y | Flip 3D body around Y-axis |
Spacebar | Rotate 3D body counterclockwise |
Shift+Spacebar | Rotate 3D body clockwise |
2 | Rotate 3D body counterclockwise around it's X-axis |
3 | Decrease 3D body standoff height (Z-axis) by one Snap Grid increment |
4 | Rotate 3D body counterclockwise around it's Y-axis |
6 | Rotate 3D body clockwise around it's Y-axis |
8 | Rotate 3D body clockwise around it's X-axis |
9 | Decrease 3D body standoff height (Z-axis) by one Snap Grid increment |
Left Arrow/ Right Arrow | Move 3D body left/ right along X-axis by one Snap Grid increment |
Shift+Left Arrow/ Right Arrow | Move 3D body left/ right along X-axis by 10x Snap Grid increment |
Up Arrow/ Down Arrow | Move 3D body backward/ forward along Y-axis by one Snap Grid increment |
Shift+Up Arrow/ Down Arrow | Move 3D body backward/ forward along Y-axis by 10x Snap Grid increment |
Page Up/ Page Down | Zoom in/ zoom out |
Alt+B | Fit board |
Arrow Keys | Pan in direction of arrow |
Insert | Pan In |
Delete | Pan Out |
T, then E | Access Export dialog for IGES/STEP format |
T, then P | Access PCB Editor – PCB Legacy 3D page of Preferences dialog |
Page Up/ Page Down | Zoom in/ zoom out |
Alt+M | Fit model |
Arrow Keys | Pan in direction of arrow |
Insert | Pan in |
Delete | Pan out |
F2 | Rename model |
Shift+Delete | Delete mode |
Ctrl+T | Set rotation and translation |
T, then I | Import 3D model |
T, then E | Export model in IGES format |
T, then P | Access Preferences dialog |
Ctrl+X/Shift+Delete | Cut |
Ctrl+C/Ctrl+Insert | Copy |
Ctrl+V/Shift+Insert | Paste |
Ctrl+D | Duplicate |
Delete | Clear |
Alt+Enter | Configure |
Ctrl+F9 | Run Focused Output Generator |
Shift+Ctrl+F9 | Run Selected Output Generators |
F9 | Run all Batch-enabled Output Generators |
Shift+Ctrl+O | Access Output Job Options dialog |
Ctrl+Z/Alt+Backspace | Undo |
Ctrl+Y/Ctrl+Backspace | Redo |
Ctrl+X | Cut |
Ctrl+C/Ctrl+Insert | Copy |
Ctrl+V/Shift+Insert | Paste |
Ctrl+E | Clear |
Ctrl+M | Mirror |
Ctrl+R | Rotate |
Ctrl+L | Align Selective |
Alt+C | Select using crossing window |
Alt+P | Select previous selection |
Ctrl+F | Toggle Flash selection mode on/ off |
Ctrl+T | Toggle Trace selection mode on/ off |
Ctrl+A | Array objects |
Ctrl+D | Modify/change objects |
Ctrl+I | Set origin |
Ctrl+U | Scale objects |
Home | View all |
Shift+P | View around specified point |
Ctrl+ Mouse-wheel up /Page Up | Zoom in |
Ctrl+Mouse-wheel down/Page Down | Zoom out |
Mouse-wheel up | Pan up |
Mouse-wheel down | Pan down |
Shift+Mouse-wheel up | Pan left |
Shift+Mouse-wheel down | Pan right |
Shift+V | Zoom last |
End | Refresh |
D | Dynamic panning mode |
Shift+B | View Film Box |
Ctrl+Home | Zoom Film Box |
Alt+Home | Zoom current DCode |
Shift+E | Toggle view of Extents Box On/Off |
Shift+F | Toggle Fill Mode On/Off |
Shift+H | Toggle highlight of current objects using current D code |
N | Toggle negative view |
Shift+T | Toggle translucent view |
Shift+G | Access CAM Editor – Drawing Modes page of Preferences dialog |
Q | Query object |
Shift+N | Query net |
Shift+M | Measure point-to-point |
Shift+A | Access apertures table |
K | Access Set Layers Off dialog |
Alt+K | Access Set Layers On dialog |
Shift+S | Toggle Object Snap mode |
Esc | Cancel action |
Shift+Ctrl+R | Repeat last action |
+ (Numeric keypad) | Display next layer only |
- (Numeric keypad) | Display previous layer only |
* (Numeric keypad) | Display next signal/plane layer only |
Ctrl+X/Shift+Delete | Cut waveform |
Ctrl+V/Shift+Insert | Paste waveform |
Left-click & drag | Relocate focused waveform |
J | Display Jump sub-menu |
Shift+Ctrl+F | Jump to first transition for focused waveform |
Shift+Ctrl+N | Jump to next transition for focused waveform |
Shift+Ctrl+P | Jump to previous transition for focused waveform |
Shift+Ctrl+L | Jump to last transition for focused waveform |
T, then P | Access Preferences dialog |
Ctrl+X/Shift+Delete | Cut |
Ctrl+C | Copy |
Ctrl+V/Shift+Insert | Paste |
Delete | Clear |
+ (Numeric keypad) | Next chart |
- (Numeric keypad) | Previous chart |
Page Up | Zoom in |
Page Down | Zoom out |
Ctrl+Page Down | Fit document |
End | Refresh |
Esc/Shift+C | Clear filter |
Up Arrow/ Down Arrow | Scroll through chart, then one wave plot at a time in direction of arrow |
Shift+Up Arrow/ Down Arrow | Scroll upwards/ downwards through chart, then one page at a time |
Ctrl+Up Arrow/Ctrl+Home | Jump to top of chart |
Ctrl+Down Arrow/Ctrl+End | Jump to bottom of chart |
Arrow left, Arrow right | Scroll through chart, then one major division on X-axis at a time in direction of arrow |
Shift+Left Arrow | Scroll left through chart, then one page at a time |
Ctrl+Left Arrow | Jump to start of X-axis |
Shift+Right Arrow | Scroll right through chart, then one page at a time |
Ctrl+Right Arrow | Jump to End of X-axis |
Ctrl+Z | Undo |
Ctrl+X/Shift+Delete | Cut |
Ctrl+C/Ctrl+Insert | Copy |
Ctrl+V/Shift+Insert | Paste |
Enter | Insert carriage return |
Ctrl+N | Insert new line |
Tab | Insert tab |
Shift+Tab | Tab backwards |
Insert | Toggle text Insertion mode between Insert and Overwrite |
Shift+Ctrl+C | Clear Filter Marks |
Ctrl+F | Find text |
Ctrl+H/Ctrl+R) | Find and replace text |
F3/Ctrl+L | Find next instance of searched text |
Shift+Ctrl+F | Find next selected instance of searched text |
Ctrl+A | Select all |
Page Up | Scroll one Page Up |
Page Down | Scroll one Page Down |
Ctrl+Up Arrow | Scroll one line up |
Ctrl+Down Arrow | Scroll one line down |
Ctrl+Page Up/ Page Down | Move cursor to top/ bottom of window |
Home/ End | Move cursor to beginning/ end of current line |
Ctrl+Home/ End | Move cursor to beginning/ end of file |
Up Arrow, Down Arrow | Move cursor one line up/ down |
Left Arrow, Right Arrow | Move cursor one character left/ right |
Ctrl+Left Arrow/ Right Arrow | Move cursor one word left/ right |
Shift+Ctrl+Home/ End | Extend selection to beginning/ end of file |
Shift+Page Up/ Page Down | Extend selection one page up/ one page down |
Shift+Ctrl+Page Up/ Page Down | Extend selection to top of window/ bottom of window |
Shift+Home/ End | Extend selection to beginning/ end of current line |
Shift+Left Arrow/ Right Arrow | Extend selection one character to the left/ to the right |
Shift+Up Arrow/ Down Arrow | Extend selection to same column in previous line/ in next line |
Alt+Shift+Ctrl+Home/ End | Extend selection column to beginning of file/ end of file |
Alt+Shift+Page Up/ Page Down | Extend selected column one page up/ one page down |
Alt+Shift+Ctrl+Page Up/ Page Down | ExtEnd selection column to top of window/ to bottom of window |
Alt+Shift+Home/ End | Extend selection column to beginning/ end of current line |
Alt+Shift+Left Arrow | Extend selection column to the left/ to the right by one column |
Alt+Shift+Up Arrow/ Down Arrow | Extend selection column up / column down by one line |
Alt+Shift+Ctrl+Left Arrow/ Right Arrow | Extend selection column one word left/ one word right |
Alt+Left-click & drag | Define selection column using mouse |
Delete | Delete character to the right of cursor position |
Backspace | Delete character to the left of the cursor position |
Ctrl+Backspace | Delete to beginning of previous word |
Ctrl+T | Delete to beginning of next word |
Ctrl+Y | Redo or restore the changes by the Undo. |
Ctrl+Q+Y | Delete to End of current line |
Alt+T, then P | Access Text Editors – General page of Preferences dialog |
F9 | Run the program being debugged |
Ctrl+F9 | Run to cursor |
F5 | Toggle breakpoint for current line |
Left-click in gutter | Toggle breakpoint for line |
Ctrl+F5 | Add Watch |
F7 | Step into the current source line |
Ctrl+F7 | Evaluate |
Shift+F7 | Step into the current instruction |
Shift+F8 | Step to the next instruction |
Ctrl+F2 | Reset the current debug session |
Ctrl+F3 | Finish the current debug session |
Left-click on code outline +- | Expand/contract segment of code |
Ctrl+Double Left-click on code outline +/- | Expand/contract all code segments |
Ctrl+F9 | Compile source HDL documents |
F9 | Run Forever |
Ctrl+F5 | Run simulation for the last time step |
Ctrl+F8 | Run simulation to a specified time |
Ctrl+F11 | Run simulation to next debug point |
Ctrl+F7 | Run simulation for a time step |
F6 | Run simulation for a Delta step |
F7 | Run simulation, then stepping into procedures/functions |
F8 | Run simulation, then stepping over procedures/functions |
Ctrl+F2 | Reset current simulation session |
Ctrl+F3 | End current simulation session |
Left-click in gutter | Toggle breakpoint for line |
Left-click on code outline +/- | Expand/contract segment of code |
Ctrl+Left-click on code outline +/- | Expand/contract all code segments |
F9 | Run the script |
Ctrl+F9 | Run to cursor |
F5 | Toggle breakpoint for current line |
Left-click in gutter | Toggle breakpoint for line |
Ctrl+F7 | Evaluate |
F7/F8 | Step into the current/ next source line |
Ctrl+F3 | Stop script execution |
Advertising for Consideration:
Ads for Consideration:
Please kindly review and accept Terms of Use and Cookie & Policy Policy